Canon ip1180 Waste Ink Tank Cleaning
1.Turn off your Canon ip1180 printer and unplug the power cord and all other cables connected to the printer.
2.Turn the printer on its side and carefully remove any tape that may be covering the waste ink tank.
3.Locate the waste ink tank and the two valves located to the side.
4.Use a small screwdriver to carefully remove the two screws located on each valve.
5.Remove the plastic cap located on the top of the waste ink tank.
6.Carefully remove the waste ink tank from the printer.
7.Empty the waste ink tank into a safe and disposable container.
8.Clean the inside of the waste ink tank with a soft cloth and warm water.
9.When the waste ink tank is dry, replace the plastic cap and the two screws.
10.Replace the waste ink tank back into the printer.
11.Reattach the power cord and any other cables to the printer.
12.Turn the printer on and print a test page to ensure that the printer is working properly.
By following these steps, you should be able to successfully clean the waste ink tank of your Canon ip1180 printer. If you experience any difficulty in performing these steps, it is best to consult with a qualified service technician.
