ESTABLISHment
1. Turn off the power switch of the EPSON3218 printer, and disconnect the power plug from the power outlet.
2. Turn the printer over, and open the bottom cover.
3. Take out all the items from the bottom cover of the printer, such as screws, washers, boards and so on.
4. Search for a small square button (reset button) in the bottom cover, and press it for about five seconds until you hear the beep sound.
5. After the beep sound, release the button and wait for about 20 seconds. Then, the printer will start printing out the self-test page.
6. After the printer prints out the self-test page, take out the self-test page, and check whether the self-test page is normal.
7. If the self-test page is normal, the reset is successful. Simply put all the items back in place and plug in the power chord.
8. Turn on the switch, and the printer is back to normal.
Conclusion
Here is the process of resetting an Epson3218 printer. Before you reset, make sure you turn off the power switch and disconnect the power plug. Search for the reset button in the bottom cover, and press it until you hear the beep sound. Then, release the button and wait for the self-test page. After the self-test page has printed out, check whether it is normal. If it is, the reset is successful. Finally, put the items back in place, plug in the power chord, turn on the switch and the printer is ready to use again.
