Canon MP280 5B00 Malfunction
Canon MP280 5B00 Malfunction is a common error for Canon MP280 printers. This error message usually indicates that the printer’s ink absorber is full and needs to be replaced. This error can also appear after replacing an ink cartridge.
The first step in resolving this issue is to power the printer off and back on. This will reset the printer and potentially resolve the problem. If this does not work, a service mode reset will need to be performed.
To do this, press and hold the Stop/Reset button on the printer and hold it down while you press and hold the Power button. After 2 minutes, release both buttons and the printer should enter Service Mode. Press the arrow buttons to select “EEPROM Clear” and press the big Color button to confirm. The printer will shut down and power on again after the reset is complete.
If the error message continues to appear, the next step is to replace the printer’s ink absorber. This is a small part at the bottom of the printer that absorbs excess ink from the printing process. Carefully remove the screws from the printer’s casing and locate the absorber. It is usually a white foam pad located towards the back of the printer.
Remove the absorber carefully and replace it with the new one. Make sure the new absorber is correctly positioned and secured. Replace the printer’s casing and screws and test the printer again.
If the error message continues to appear after this, then the issue is more likely a faulty logic board or bad connection issue. This will require a professional service technician to fix. Canon technicians can diagnose and repair the issue quickly and ensure it is running properly.
In summary, Canon MP280 5B00 Malfunction is an error that indicates the printer’s ink absorber is full and needs to be replaced. This process involves a Service Mode reset along with replacing the ink absorber. If this does not work, a professional technician should be contacted to diagnose and repair the issue.
