Canon MX360 Ink Pad Replacement Tutorial
1. First you will need to turn off and unplug the printer.
2. Next you will need to open the printer cover.
3. Unscrew the two screws located at the back of the printer. Be sure to keep track of where the screws were located.
4. Carefully lift the cover off and set it aside.
5. Locate the pad assembly located at the bottom of the printer.
6. Carefully unplug the three wire connectors from the pad assembly.
7. Using a Phillips head screwdriver, loosen the two screws to remove the pad assembly.
8. Take the new pad assembly and carefully plug in the three wire connectors.
9. Place the new pad assembly in position and tighten the two screws.
10. Replace the cover and screw in the screws from earlier.
11. Turn on the printer and test to make sure it is working properly.
Congratulations, you have just replaced your Canon MX360 ink pad! Be sure to properly dispose of the old pad assembly.
